EasyManua.ls Logo

3Com Switch 4500 Family - Tftp Tftp-Server Source-Ip; Tftp Source-Interface

3Com Switch 4500 Family
942 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-5
Description
Use the tftp tftp-server source-interface command to connect to a TFTP server through the specified
source interface, and perform download or upload operations. If the specified source interface does not
exist, a prompt appears to show the command fails to be executed.
Examples
# Connect to the remote TFTP server whose IP address is 192.168.8.8 through the source interface
VLAN-interface 1, and download the file named test.bin from it.
<Sysname> tftp 192.168.8.8 source-interface Vlan-interface 1 get test.bin
tftp tftp-server source-ip
Syntax
tftp tftp-server source-ip ip-address { get source-file [ dest-file ] | put source-file-url [ dest-file ] }
View
User view
Parameters
tftp-server: IP address or host name of the TFTP server to be connected to, a string of 1 to 20
characters. If the switch belongs to a cluster, the value cluster means to connect to the TFTP server of
the cluster. For the configuration of the TFTP server of a cluster, refer to the Cluster part in this manual.
ip-address: IP address to be set as the source IP address.
get: Specifies to download a file from the TFTP server.
source-file: Name of the file to be downloaded.
dest-file: File name used when a file is downloaded and saved to the switch.
put: Specifies to upload a file to the TFTP server.
source-file-url: Path and name of the file to be uploaded to the TFTP server.
dest-file: File name used when a file is uploaded and saved to a TFTP server.
Description
Use the tftp tftp-server source-ip command to connect to a TFTP server through the specified source
IP address, and perform download or upload operations. If the specified source IP address does not
exist, a prompt appears to show the command fails to be executed.
Examples
# Connect to the remote TFTP server whose IP address is 192.168.8.8 through the source IP address
192.168.0.1, and download the file named test.bin from it.
<Sysname> tftp 192.168.8.8 source-ip 192.168.0.1 get test.bin
tftp source-interface
Syntax
tftp source-interface interface-type interface-number
undo tftp source-interface

Table of Contents

Related product manuals