1-18
Related commands: info-center enable, display info-center.
Examples
# Enable the system to output trap information to the trap buffer, whose size is set to 30.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] info-center trapbuffer size 30
reset logbuffer
Syntax
reset logbuffer [ unit unit-id ]
View
User view
Parameters
unit-id: Unit ID of the device.
Description
Use the reset logbuffer command to clear information recorded in the log buffer.
Examples
# Clear information recorded in the log buffer.
<Sysname> reset logbuffer
reset trapbuffer
Syntax
reset trapbuffer [ unit unit-id ]
View
User view
Parameters
unit-id: Unit ID of the device.
Description
Use the reset trapbuffer command to clear information recorded in the trap buffer.
Examples
# Clear information recorded in the trap buffer.
<Sysname> reset trapbuffer
To Next Page
Loading...
