1-13
By default, no OUI value is set for authentication.
z The OUI value set by this command takes effect only when the security mode of the port is set to
userLoginWithOUI by the port-security port-mode command.
z The OUI value set by this command cannot be a multicast MAC address.
Related commands: port-security port-mode.
Examples
# Configure an OUI value of 00ef-ec00-0000, setting the OUI index to 5.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] port-security oui 00ef-ec00-0000 index 5
port-security port-mode
Syntax
port-security port-mode { autolearn | mac-and-userlogin-secure | mac-and-userlogin-secure-ext
| mac-authentication | mac-else-userlogin-secure | mac-else-userlogin-secure-ext | secure |
userlogin | userlogin-secure | userlogin-secure-ext | userlogin-secure-or-mac |
userlogin-secure-or-mac-ext | userlogin-withoui }
undo port-security port-mode
View
Ethernet port view
Parameters
Table 1-3 shows the description on the security mode keywords.
Table 1-3 Keyword description
Keyword Security mode Description
autolearn autolearn
In this mode, a port can learn a specified
number of MAC addresses and save those
addresses as security MAC addresses. It
permits only packets whose source MAC
addresses are the security MAC addresses
that were learned or configured manually.
When the number of security MAC addresses
reaches the upper limit configured by the
port-security max-count command, the port
changes to work in secure mode and no more
MAC addresses can be added to the port.
To Next Page
Loading...
