1-7
display ntdp device-list
Syntax
display ntdp device-list [ verbose ]
View
Any view
Parameters
verbose: Displays the detailed information of devices in a cluster.
Description
Use the display ntdp device-list command to display the cluster device information collected by
NTDP.
Examples
# Display the list of devices collected by NTDP.
<Sysname> display ntdp device-list
MAC HOP IP PLATFORM
000f-e20f-3901 0 100.100.1.1/24 Switch 4500
000f-e20f-3190 1 16.1.1.1/24 Switch 4500
Table 1-3 Description on the fields of the display ntdp device-list command
Field Description
MAC MAC address of a device collected by NTDP
HOP Hops from this device to the collected device
IP
IP address and mask length of the management
VLAN interface on the collected device
PLATFORM Platform information about the collected device
# Display detailed device information collected by NTDP.
<Sysname> display ntdp device-list verbose
Hostname : 4500
MAC : 000f-e20f-1234
Hop : 0
Platform : Switch 4500
IP : 100.100.1.1/24
Version:
3Com Corporation
Switch 4500 26-Port Software Version 3Com OS V3.03.00s56c01
Copyright (c) 2004-2008 3Com Corporation and its licensors, All rights reserved.
Switch 4500-26Port Switch 4500-V3.03.00s56c01
Cluster : Candidate switch
To Next Page
Loading...
