1-2
[Sysname] domain aabbcc.net
New Domain added.
[Sysname-isp-aabbcc.net] access-limit enable 500
accounting
Syntax
accounting { none | radius-scheme radius-scheme-name }
undo accounting
View
ISP domain view
Parameters
none: Specifies not to perform user accounting.
radius-scheme radius-scheme-name: Specifies to use a RADIUS accounting scheme. Here,
radius-scheme-name is the name of a RADIUS scheme; it is a string of up to 32 characters.
Description
Use the accounting command to configure an accounting scheme for current ISP domain.
Use the undo accounting command to cancel the accounting scheme configuration for current ISP
domain.
By default, no separate accounting scheme is configured for an ISP domain.
When you use the accounting command to reference a RADIUS scheme in current ISP domain, the
RADIUS scheme must already exist.
The accounting command takes precedence over the scheme command. If the accounting
command is used in ISP domain view, the system uses the scheme referenced in the accounting
command to charge the users in the domain. Otherwise, the system uses the scheme referenced in the
scheme command to charge the users.
Related commands: scheme, radius scheme, accounting optional.
Examples
# Specify "radius" as the RADIUS accounting scheme that will be referenced by ISP domain
"aabbcc.net".
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] domain aabbcc.net
New Domain added.
[Sysname-isp-aabbcc.net] accounting radius-scheme radius
To Next Page
Loading...
