3Com Switch 4500 Family - Display Cluster Black-List

1-48
<aaa_0.Sysname> display cluster base-topology
--------------------------------------------------------------------
(PeerPort) ConnectFlag (NativePort) [SysName:DeviceMac]
--------------------------------------------------------------------
[aaa_0.3Com:000f-e202-2180]
|
├-(P_0/40)<-->(P_0/6)[Sysname:000f-e200-2200]
|
├-(P_0/28)<-->(P_3/0/1)[Sysname:000f-e200-1774]
|
├-(P_0/22)<-->(P_1/0/2)[aaa_5.3Com:000f-e200-5111]
|
├-(P_0/18)<-->(P_3/0/2)[Sysname Switch 4500:000f-e218-d0d0]
|
├-(P_0/14)<-->(P_1/0/2)[Sysname:000f-e200-5601]
|
└-(P_0/4)<-->(P_0/2)[Switch 4500-26Port:000f-e200-00cc]
The output information of the display cluster base-topology command is in the following format:
(peer port number)<-->(local port number)[peer device name:peer device MAC address]
For example, (P_0/40)<-->(P_0/6)[Sysname:000f-e200-2200] means that the peer device uses its port
Ethernet 1/0/40 to connect to port Ethernet 1/0/6 of the local device; the peer device name is Sysname;
the MAC address of the peer device is 000f-e200-2200.
display cluster black-list
Syntax
display cluster black-list
View
Any view
Parameters
None
Description
Use the display cluster black-list command to display the information of devices in the current cluster
blacklist.
Related commands: black-list.
Examples
# Display the contents of the current cluster blacklist.
<aaa_0.Sysname> display cluster black-list
Device ID Access Device ID Access port
000f-e200-5502 000f-e202-2180 Ethernet1/0/24
00e0-fd34-bc66 000f-e202-2180 Ethernet1/0/1