1-22
Examples
# Specify to prompt users to use customized passwords to enter the BOOT menu.
<Sysname> startup bootrom-access enable
<Sysname> display startup unit 1
MainBoard:
Current Startup saved-configuration file: flash:/config.cfg
Next main startup saved-configuration file: flash:/config.cfg
Next backup startup saved-configuration file: NULL
Bootrom-access enable state: enabled
Configuration File Backup and Restore Commands
backup current-configuration
Syntax
backup { unit unit-id | fabric } current-configuration to { dest-addr | dest-hostname } filename.cfg
View
User view
Parameters
unit unit-id: Specifies the unit ID of a switch. The configuration of the specified unit will be backed up.
fabric: Specifies to back up the configuration of the whole fabric system.
dest-addr: IP address of a TFTP server.
dest-hostname: Host name of a TFTP server.
filename.cfg: Name of the configuration file to which the current configuration will be backed up, a string
of 5 to 56 characters (including the extension .cfg).
Description
Use the backup unit unit-id current-configuration to command to back up the current configuration of
the specified switch to the specified TFTP server.
Use the backup fabric current-configuration to command to back up the current configurations of all
the switches in the fabric to the specified TFTP server.
Examples
# Back up the current configuration of unit 8 to the file aaa.cfg on the TFTP server whose IP address is
1.1.1.253.
<Sysname> backup unit 8 current-configuration to 1.1.1.253 aaa.cfg
Backup current configuration to 1.1.1.253. Please wait...
File will be transferred in binary mode.
Copying file to remote tftp server. Please wait...
TFTP: 1958 bytes sent in 2 second(s).
File uploaded successfully.
Unit 8: Backup current configuration finished!
To Next Page
Loading...
