1-11
Default Domain Name: system
Total 1 domain(s).1 listed.
Table 1-2 Description on the fields of the display domain command
Field Description
Domain Domain name
State
Status of the domain, which can be active or
block.
Scheme AAA scheme that the domain uses
Access-Limit
Maximum number of local user connections in
the domain
Vlan-assignment-mode
VLAN assignment mode, which can be Integer or
String.
Domain User Template
Domain user template settings, that is, attribute
settings for all users in the domain.
Idle-Cut Status of the idle-cut function
Self-service URL Self-service URL for password changing
Messenger Time
Settings of the messenger time service, which is
for reminding online users of their remaining
online time.
The setting in this example indicates that the
system starts to remind an online user (at an
interval of 10 minutes) when the remaining
online time is 30 minutes.
Default Domain Name Default ISP domain of the system
display local-user
Syntax
display local-user [ domain isp-name | idle-cut { disable | enable } | vlan vlan-id | service-type { ftp
| lan-access | ssh | telnet | terminal } | state { active | block } | user-name user-name ]
View
Any view
Parameters
domain isp-name: Displays all local users belonging to a specified ISP domain. Here, isp-name is the
name of an ISP domain, a string of up to 128 characters. You can only specify an existing ISP domain.
idle-cut { disable | enable }: Displays the local users who are inhibited from enabling the idle-cut
function, or the local users who are allowed to enable the idle-cut function. Here, disable specifies the
inhibited local users and enable specifies the allowed local users.
To Next Page
Loading...
