1-10
ACL Group=Disable
CAR=Disable
Priority=Disable
Start=2000-04-03 02:51:53 ,Current=2000-04-03 02:52:22 ,Online=00h00m29s
On Unit 1:Total 1 connections matched, 1 listed.
Total 1 connections matched, 1 listed.
Here, Port NO=0x10003001 means (by the binary bits):
Table 1-1 Description of the Port NO field
31 to 28 bit 27 to 24 bit 23 to 20 bit 19 to 12 bit 11 to 0 bit
UNIT ID Slot number Sub-slot number Port number VLAN ID
display domain
Syntax
display domain [ isp-name ]
View
Any view
Parameters
isp-name: Name of an ISP domain, a string of up to 128 characters. This must be the name of an
existing ISP domain.
Description
Use the display domain command to display configuration information about one specific or all ISP
domains.
Related commands: access-limit, domain, scheme, state.
Examples
# Display configuration information about all ISP domains.
<Sysname> display domain
0 Domain = system
State = Active
Scheme = LOCAL
Access-limit = 512
Vlan-assignment-mode = Integer
Domain User Template:
Idle-cut = = Enable Time = 60(min) Flow = 200(byte)
Self-service URL = http://aabbcc.net
Messenger Time Maxlimit = 30(min) span = 10(min)
To Next Page
Loading...
