1-4
Field Description
802.1X protocol is disabled 802.1x is disabled on the port
Proxy trap checker is disabled
Whether or not to send Trap packets when
detecting a supplicant system in logging in
through a proxy.
z Disable means the switch does not send Trap
packets when it detects that a supplicant
system logs in through a proxy.
z Enable means the switch sends Trap packets
when it detects that a supplicant system logs
in through a proxy.
Proxy logoff checker is disabled
Whether or not to disconnect a supplicant
system when detecting it in logging in through a
proxy.
z Disable means the switch does not
disconnect a supplicant system when it
detects that the latter logs in through a proxy.
z Enable means the switch disconnects a
supplicant system when it detects that the
latter logs in through a proxy.
Version-Check is disabled
Whether or not the client version checking
function is enabled:
z Disable means the switch does not checks
client version.
z Enable means the switch checks client
version.
The port is an authenticator The port acts as an authenticator system.
Authentication Mode is Auto The port access control mode is Auto.
Port Control Type is Mac-based
The access control method of the port is
MAC-based. That is, supplicant systems are
authenticated based on their MAC addresses.
ReAuthenticate is disabled 802.1x re-authentication is disabled on the port.
Max number of on-line users
The maximum number of online users that the
port can accommodate
… Information omitted here
dot1x
Syntax
dot1x [ interface interface-list ]
undo dot1x [ interface interface-list ]
View
System view, Ethernet port view
Parameters
interface-list: Ethernet port list, in the form of interface-list= { interface-type interface-number [ to
interface-type interface-number ] } &<1-10>, in which interface-type specifies the type of an Ethernet
To Next Page
Loading...
