1-31
Note that the specified unit of data flows sent to the RADIUS server must be consistent with the traffic
statistics unit of the RADIUS server. Otherwise, accounting cannot be performed correctly.
Related commands: display radius scheme.
Examples
# Specify to measure data and packets in data flows to RADIUS servers in kilo-bytes and kilo-packets
respectively in RADIUS scheme radius1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] radius scheme radius1
New Radius scheme
[Sysname-radius-radius1] data-flow-format data kilo-byte packet kilo-packet
display local-server statistics
Syntax
display local-server statistics
View
Any view
Parameters
None
Description
Use the display local-server statistics command to display the RADIUS message statistics about
local RADIUS server.
Related commands: local-server.
Examples
# Display the RADIUS message statistics about local RADIUS server.
<Sysname> display local-server statistics
On Unit 1:
The localserver packet statistics:
Receive: 30 Send: 30
Discard: 0 Receive Packet Error: 0
Auth Receive: 10 Auth Send: 10
Acct Receive: 20 Acct Send: 20
display radius scheme
Syntax
display radius scheme [ radius-scheme-name ]
To Next Page
Loading...
