1-8
timeout
Syntax
timeout time
undo timeout
View
remote-ping test group view
Parameter
time: Timeout time. It ranges from 1 to 60 seconds and defaults to 3 seconds.
Description
Use the timeout command to configure a timeout time for a test.
Use the undo timeout command to restore to the default timeout time.
Example
# Set the timeout time of the “administrator-icmp” test group to 10 seconds.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] remote-ping administrator icmp
[Sysname-remote-ping-administrator-icmp] timeout 10
To Next Page
Loading...
