1-50
undo secondary accounting
View
RADIUS scheme view
Parameters
ip-address: IP address of the secondary accounting server to be used, in dotted decimal notation.
port-number: UDP port number of the secondary accounting server, ranging from 1 to 65535.
Description
Use the secondary accounting command to set the IP address and port number of the secondary
RADIUS accounting server to be used by the current scheme.
Use the undo secondary accounting command to restore the default IP address and port number of
the secondary RADIUS accounting server, which are 0.0.0.0 and 1813 respectively.
Related commands: key, radius scheme, state.
Examples
# Set the IP address and UDP port number of the secondary accounting server for RADIUS scheme
radius1 to 10.110.1.1 and 1813 respectively.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] radius scheme radius1
New Radius scheme
[Sysname-radius-radius1] secondary accounting 10.110.1.1 1813
secondary authentication
Syntax
secondary authentication ip-address [ port-number ]
undo secondary authentication
View
RADIUS scheme view
Parameters
ip-address: IP address of the secondary authentication/authorization server to be used, in dotted
decimal notation.
port-number: UDP port number of the secondary authentication/authorization server, ranging from 1 to
65535.
Description
Use the secondary authentication command to set the IP address and port number of the secondary
RADIUS authentication/authorization server to be used by the current scheme.
To Next Page
Loading...
Need help?
General