3Com Switch 4500 Family - Display Multicast-Source-Deny; Mac-Address Multicast Interface

1-2
Field Description
STATE
State of the MAC address, which includes only
Config static, indicating that the table entry is
manually added.
PORT INDEX
Ports out which the multicast packets destined
for the multicast MAC address are forwarded
AGING TIME(s)
State of the aging timer. The aging timer for
static multicast MAC addresses has only one
state: NOAGED, indicating that the entry never
expires.
display multicast-source-deny
Syntax
display multicast-source-deny [ interface interface-type [ interface-number ] ]
View
Any view
Parameters
interface-type: Port type.
interface-number: Port number.
Description
Use the display multicast-source-deny command to display the multicast source port suppression
status.
z With neither a port type nor a port number specified, the command displays the multicast source
port suppression status of all the ports on the switch.
z With only a port type specified, the command displays the multicast source port suppression status
of all ports of that type.
z With both a port type and a port number specified, the command displays the multicast source port
suppression status of the specified port.
Related commands: multicast-source-deny.
Examples
# Display the multicast source port suppression status of Ethernet 1/0/1.
<Sysname> display multicast-source-deny interface Ethernet 1/0/1
Ethernet1/0/1 Multicast-source-deny disabled.
The information above shows that multicast source port suppression is disabled on Ethernet 1/0/1.
mac-address multicast interface
Syntax
mac-address multicast mac-address interface interface-list vlan vlan-id
undo mac-address multicast [ mac-address [ interface interface-list ] vlan vlan-id ]