3Com Switch 4500 Family - Display Memory; Display Power

3-5
Examples
# Display the working states of the fans.
<Sysname> display fan
Unit 1
Fan 1 State: Normal
The above information indicates that the fan works normally.
display memory
Syntax
display memory [ unit unit-id ]
View
Any view
Parameters
unit-id: Unit ID of a switch.
Description
Use the display memory command to display the memory usage of a specified switch.
Examples
# Display the memory usage of this switch.
<Sysname> display memory
Unit 1
System Available Memory(bytes): 30045312
System Used Memory(bytes): 15698468
Used Rate: 52%
Table 3-4 Description on the fields of the display memory command
Field Description
System Available Memory(bytes) Available memory size of the system, in bytes
System Used Memory(bytes) Used memory size of the system, in bytes
Used Rate Percentage of the used memory
display power
Syntax
display power [ unit unit-id [ power-id ] ]
View
Any view