1-23
speed
Syntax
speed speed-value
undo speed
View
AUX user interface view
Parameters
speed-value: Transmission speed (in bps). This argument can be 300, 600, 1200, 2400, 4800, 9600,
19,200, 38,400, 57,600, and 115,200.
Description
Use the speed command to set the transmission speed of the user interface.
Use the undo speed command to revert to the default transmission speed.
By default, the transmission speed is 19,200 bps.
z This command takes effect on AUX user interfaces only.
z The transmission speed setting on the terminal and that on the device user interface must be the
same for communication.
Examples
# Set the transmission speed of the user interface AUX 0 to 115,200 bps.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface aux 0
[Sysname-ui-aux0] speed 115200
stopbits
Syntax
stopbits { 1 | 1.5 | 2 }
undo stopbits
View
AUX user interface view
Parameters
1: Sets the stopbits to 1.
1.5: Sets the stopbits to 1.5.
To Next Page
Loading...
