1-1
1 Auto Detect Configuration Commands
Auto Detect Configuration Commands
z Refer to the Routing Protocol part of the manual for information about static routing.
z Refer to the VRRP part of the manual for information about VRRP.
detect-group
Syntax
detect-group group-number
undo detect-group group-number
View
System view
Parameters
group-number: Detected group number ranging from 1 to 25.
Description
Use the detect-group command to create a detected group and enter detected group view.
Use the undo detect-group command to remove a detected group.
When a detected group is used by other features (such as static routing, VRRP, or interface backup),
the detected group cannot be deleted unless you delete the features first.
Examples
# Create detected group 10.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] detect-group 10
To Next Page
Loading...
