Part Contents
27 UDP Helper Introduces the commands used for configuring UDP helper
28 SNMP-RMON Introduces the SNMP-related and RMON-related commands.
29 NTP Introduces the NTP-related commands.
30 SSH Introduces the commands used for configuring SSH2.0
31 File System Management Introduces the commands used for file system management.
32 FTP-SFTP-TFTP Introduces the FTP/SFTP/TFTP-related commands.
33 Information Center
Introduces the commands used for configuring the information
center.
34 System Maintenance and
Debugging
Introduces the commands used for system maintenance and
debugging.
35 VLAN-VPN
Introduces the VLAN-VPN-related and the selective
QinQ-related commands
36 Remote-ping Introduces the Remote-ping related commands.
37 IPv6 Management Introduces the commands used for IPv6 Management.
38 Access Management Introduces the commands used for Access Management.
39 Appendix
Lists all the commands described in this command manual in
an alphabetic order. The parts and pages where the
commands are described are also given.
Conventions
The manual uses the following conventions:
Command conventions
Convention Description
Boldface
The keywords of a command line are in Boldface.
italic
Command arguments are in italic.
[ ] Items (keywords or arguments) in square brackets [ ] are optional.
{ x | y | ... }
Alternative items are grouped in braces and separated by vertical bars.
One is selected.
[ x | y | ... ]
Optional alternative items are grouped in square brackets and
separated by vertical bars. One or none is selected.
{ x | y | ... } *
Alternative items are grouped in braces and separated by vertical bars.
A minimum of one or a maximum of all can be selected.
[ x | y | ... ] *
Optional alternative items are grouped in square brackets and
separated by vertical bars. Many or none can be selected.
&<1-n>
The argument(s) before the ampersand (&) sign can be entered 1 to n
times.
# A line starting with the # sign is comments.
To Next Page
Loading...
