3Com Switch 4500 Family - Page 843

3-12
Description
Use the display transceiver manuinfo interface command to display part of the electrical label
information of a single or all anti-spoofing pluggable transceivers customized by H3C.
Examples
# Display part of the electrical label information of the anti-spoofing pluggable transceiver customized
by H3C on interface GigabitEthernet 1/0/25.
<Sysname> display transceiver manuinfo interface gigabitethernet 1/0/25
GigabitEthernet1/0/25 transceiver manufacture information:
Manu. Serial Number : 213410A0000054000251
Manufacturing Date : 2007-07-28
Vendor Name : H3C
Table 3-9 Description on the fields of display transceiver manuinfo interface
Field Description
Manu. Serial Number
Serial number generated during debugging and
testing
Manufacturing Date
Debugging and testing date.. The date takes the
value of the system clock of the computer that
performs debugging and testing.
Vendor Name Vendor name specified, that is, H3C.
reboot
Syntax
reboot [ unit unit-id ]
View
User view
Parameters
unit-id: Unit ID of a switch.
Description
Use the reboot command to restart a specified Ethernet switch.
Before rebooting, the system checks whether there is any configuration change. If yes, it prompts
whether or not to proceed. This prevents the system from losing the configurations in case of shutting
down the system without saving the configurations.