Introduction to the manual
Contents of this chapter
The chapter describes applicability, target audience and purpose of this manual. It describes
the contents of this manual and refers to a list of related manuals for more information. The
chapter also contains a flowchart of steps for checking the delivery, installing and
commissioning the drive. The flowchart refers to chapters/sections in this manual.
Applicability
The manual applies to the ACQ80-04 drives.
Target audience
The reader is expected to know the fundamentals of electricity, wiring, electrical components
and electrical schematic symbols.
The manual is written for readers worldwide. Both SI and imperial units are shown. Special
US instructions for installations in the United States are given.
Purpose of the manual
This manual provides information needed for planning the installation, installing, and servicing
the drive.
Categorization by frame (size)
The ACQ80-04 is manufactured in frames (frame sizes) R0…R8. Some instructions and
other information which only concern certain frames are marked with the symbol of the
frame (R0…R8). The frame is marked on the type designation label attached to the drive,
see section Type designation label (page 34).
2
Introduction to the manual 19
To Next Page
Loading...
Need help?
General
