ABB ACQ80-04 Series User Manual

SeeTask
ACQ80-04 standard control pro-
gram firmware manual
(3AXD50000170654 [English])
Commission the drive
Terms and abbreviations
DescriptionTerm/
Abbreviation
Assistant control panelACS-AP-x
Basic control panelACS-BP-S
Optional I/O extension module underneath the fieldbus adapter moduleBIO-01
Circuit board in which the control program runsControl board
DC circuit between rectifier and inverterDC link
Energy storage which stabilizes the intermediate circuit DC voltageDC link capacit-
ors
Digital inputDI
Optional mounting platform for door mounting of control panelDPMP
Mounting platform for control panel (flush mounting)DPMP-01
Frequency converter for controlling AC motorsDrive
Embedded fieldbusEFB
Fieldbus adapterFBA
Optional CANopen adapter moduleFCAN
Optional EtherCAT adapter moduleFECA-01
Optional Ethernet adapter module for EtherNet/IP™, Modbus TCP and PROFINET IO protocolsFENA-11
Optional Ethernet adapter module for EtherNet/IP™, Modbus TCP and PROFINET IO protocols,
2-port
FENA-21
Optional PROFIBUS DP adapter moduleFPBA-01
Physical size of the drive or power moduleFrame, frame
size
Optional RS-485 (Modbus/RTU) adapterFSCA-01
Insulated gate bipolar transistorIGBT
DC circuit between rectifier and inverterIntermediate
circuit
Converts direct current and voltage to alternating current and voltage.Inverter
A pre-defined set of default values of parameters in a drive control program.Macro
Remote monitoring toolNETA-21
With fieldbus protocols based on the Common Industrial Protocol (CIPTM), such as DeviceNet
and Ethernet/IP, denotes the control of the drive using the Net Ctrl and Net Ref objects of the
ODVA AC/DC Drive Profile. For more information, see www.odva.org.
Network control
In the drive control program, user-adjustable operation instruction to the drive, or signal
measured or calculated by the drive.
In some (for example fieldbus) contexts, a value that can be accessed as an object, eg, variable,
constant, or signal.
Parameter
Programmable logic controllerPLC
Converts alternating current and voltage to direct current and voltageRectifier
Safe torque off (IEC/EN 61800-5-2)STO
Introduction to the manual 21

ABB ACQ80-04 Series Specifications

General

Brand	ABB
Model	ACQ80-04 Series
Category	Controller
Language	English