Step 6: Clear the media path.
Step 7: Replace the right inner shield.
• Line up the inner shield with the imaging drum. The right
side of the right inner shield rises higher than the left.
• Line up the rails on the shield with the tracks in the car-
riage.
• Gently but firmly push the shield about 1" (2.5 cm) onto
the carriage.
• On the right side of the shield is a plastic strip. Press
down the leading edge of this strip so that it is not dam-
aged as you slide the shield back onto the carriage.
• There are metal stops on both the shield and the carriage.
Push the inner shield all the way onto the carriage, until
the stops on the shield touch those on the carriage.
Step 8: Put the drum cover back on and secure the latches.
Step 9: Close the right side door and start the imagesetter.
7–8
•
SelectSet Avantra User Guide
To Next Page
Loading...
