Setting On and Off Time
Step 1: Press Auto. The current auto on time appears.
Step 2: Press Preset. The display reads MO-FR.
Step 3: To change the day, press plus (+) or minus (-).
Step 4: Press Enter. This displays the current hour setting.
Step 5: To change the hour, press plus (+) or minus (-).
Step 6: Press Enter. This displays the current minute setting.
Step 7: To change the minute setting, press plus (+) or minus (-).
Step 8: Press Enter to store the changes.
Step 9: Press Enter. This displays the off setting.
Step 10: To change the hour, press plus (+) or minus (-).
Step 11: Press Enter. This displays the current minute setting.
Step 12: To change the minute setting, press plus (+) or minus (-).
Step 13: Press Enter to store the changes.
Note: If you select auto on/off without setting an off
time, the processor defaults to 12:00 AM for the off
time, assuming that the system clock is set correctly.
9–10
•
Avantra User Guide
To Next Page
Loading...
