Checking Preset Values
You can check any preset value at any time.
For example, to check the fixer temperature and compare it with the
preset value, follow these steps:
Step 1: Press Fix and Temp.
• The actual fixer temperature appears. For example:
FIX TEMP 33 C
Step 2: Press Preset while the actual temperature is displayed.
• The preset fixer temperature appears. For example:
FIX SET 35 C
Step 3: If required, press plus (+) or minus (-) to change the setting.
Step 4: Press Enter to store the setting that appears on the display.
9–12
•
Avantra User Guide
To Next Page
Loading...
