Changing the Developer Time
Follow these steps to change the developer time.
Step 1: Press DEV and TIME.
• The current developer time appears. For example:
DEV TIME 16 SEC
Step 2: Press PRESET.
• The preset developer time appears. For example:
DEV SET 16 SEC
Step 3: Press plus (+) or minus (-) to change the setting.
Step 4: Press ENTER to store the setting that appears on the display.
Range for Developer Time: 10 to 60 seconds.
Avantra 20/25 OLP: Processor Operation
•
9–13
To Next Page
Loading...
