Changing Temperature
Follow this procedure to change the developer temperature.
Step 1: Press DEV TEMP.
• The actual developer temperature appears. For example:
DEV TEMP 32 C
Step 2: Press PRESET.
• The preset developer temperature appears. For example:
DEV SET 32 C
Step 3: Press plus (+) or minus (-) to change the setting.
Step 4: Press ENTER to store the setting that appears on the display.
To adjust fixer or dryer temperature, press FIX or DRY instead of DEV
in Step 1.
Range for Developer and Fixer Temp.: 23–43° C.
Range for Dryer Temp.: 30–60° C.
9–14
•
Avantra User Guide
To Next Page
Loading...
