Safety Information
This section provides safety information about the SelectSet Avantra.
• Laser information: Information about the laser device used within
the imagesetter and the laser radiation that it emits.
• Laser safety instructions: Specific instructions for safe operation of
this laser imagesetter.
• General safety instructions: Guidelines for safe operation of this
laser imagesetter.
• Sound level: States the sound level at the operator’s position and
the method used to measure it.
• Labeling: A description of the different safety and warning labels
that are attached to the SelectSet Avantra.
Laser Information
The SelectSet Avantra imagesetters are classified as Class I laser de-
vices. The maximum accessible radiation level during operation and
maintenance is less than Class I limits. This means that you are not
exposed to any hazardous laser radiation during operation and main-
tenance. The SelectSet Avantra complies with Code of Federal Regula-
tions 21CFR, Subchapter J.
Inside SelectSet Avantra imagesetters are two Class IIIb laser products.
These devices emit radiation that is considered hazardous in accor-
dance with the Code of Federal Regulations and international stan-
dards.
You are not exposed to this level of radiation as long as protective cov-
ers remain in place and interlocks are not bypassed.
Getting Acquainted
•
1–9
To Next Page
Loading...
