Maintenance
The only maintenance you need to perform on your SelectSet Avantra
is to keep it clean. To help keep your imagesetter clean, keep your work
area as clean as possible.
Follow these guidelines when cleaning the inside of the imagesetter:
• When using a vacuum cleaner:
Use an attachment with soft bristles.
Make sure that the attachment is clean.
Do not use attachments made of metal or hard plastic. These
can damage the interior surfaces of the imagesetter.
• When dusting:
Use only a clean, dry, lint free cloth to wipe interior surfaces.
Do not use cleaning agents of any kind inside the imagesetter.
Exterior
Clean the exterior of the imagesetter as required.
• Exterior panels: Use a damp cloth. If necessary, use mild soap as a
cleaning agent.
• Control panel: Use a damp cloth.
Maintenance and Troubleshooting
•
7–11
To Next Page
Loading...
