Step 4: Turn on the other parts of your imaging system.
Step 5: To ensure consistent results, let the imagesetter run for
twenty minutes before you begin to image jobs.
Shut Down Procedure
To shut down the imagesetter, turn off the power at the control panel.
About the Control Panel
• The control panel is a liquid crystal display (LCD).
• Graphic pictures, called
icons, appear on the control panel.
• Icons represent objects (such as the imagesetter or an output cas-
sette) or functions that the imagesetter performs (such as feeding
media).
• The LCD is divided into pressure-sensitive squares.
• You operate the imagesetter by touching the icons that represent
functions. These icons are called buttons.
• Pictures and numbers appear on the control panel to show the cur-
rent status of the imagesetter. These are called status icons.
• The complete set of icons that appears on the control panel display
at one time is called a screen.
Basic Control Panel Operations
•
2–3
To Next Page
Loading...
