Checking the On/Off Selection
If you intend to use auto on/off after you set the times, check the con-
trol panel display to make sure that auto on/off is active.
• When manual on/off is active, the control panel display shows the
letter M at the right. For example:
P1 DEV 35 C 20 SEC M
• When auto on/off is active, the control panel display shows the let-
ter A at the right. For example:
P1 DEV 35 C 20 SEC A
Avantra 20/25 OLP: Processor Operation
•
9–11
To Next Page
Loading...
