Auto On/Off
You can set up the processor to turn itself on and off automatically at
specific times, or you can turn it on and off manually.
Select On/Off Mode, Display On/Off Time
Pressing the AUTO key:
1. Displays the current auto on time.
2. Switches between auto and manual on/off.
Follow this procedure:
Step 1: Note the current control panel display. For example:
P1 DEV 35 C 35 S A
(A at the right means that the auto mode is selected.)
Step 2: Press AUTO. The current auto on time appears. For example:
MO-FR 8:00
Step 3: After about ten seconds, the standard display returns. Note
that the last letter has changed. For example:
P1 DEV 35 C 35 S M
(M at the right means that manual mode is selected.)
Avantra 20/25 OLP: Processor Operation
•
9–9
To Next Page
Loading...
