C–4
•
SelectSet Avantra User Guide
Feed Amounts
These tools perform functions found in the Feed Amounts Screen.
Filename Description
LDR-01 Subtracts 1 unit from the feed and cut value.
LDR-02 Subtracts 2 units from the feed and cut value.
LDR-05 Subtracts 5 units from the feed and cut value.
LDR-10 Subtracts 10 units from the feed and cut value.
LDR01 Adds 1 unit to the feed and cut value.
LDR02 Adds 2 units to the feed and cut value.
LDR05 Adds 5 units from the feed and cut value.
LDR10 Adds 10 units from the feed and cut value.
PGSPC-01 Subtracts 1 unit from interpage spacing.
PGSPC-02 Subtracts 2 units from interpage spacing.
PGSPC-05 Subtracts 5 units from interpage spacing.
PGSPC-10 Subtracts 10 units from interpage spacing.
PGSPC01 Adds 1 unit to interpage spacing .
PGSPC02 Adds 2 units to interpage spacing.
PGSPC05 Adds 5 units to interpage spacing.
PGSPC10 Adds 10 units to interpage spacing.
When you specify English units of measurement, these tools subtract
inches. For example, LDR-10 would subtract 10" from the feed and cut
value.
When you specify metric units of measurement, these tools subtract
centimeters. For example, LDR-10 would subtract 10 cm from the feed
and cut value.
To Next Page
Loading...
