Automatic Functions
The processor performs these functions automatically after you turn it
on:
• Jog Function
• Automatic Start and Stop
Jog Function
Every five minutes, when the processor is on but not processing media,
an internal timer activates these functions for one minute:
1. The roller transport motor.
2. The circulation pumps for developer and fixer.
The jog function prevents crystallization on the rollers in the developer
and fixer racks.
Note: The Jog Function is also active in the Standby
Mode.
Automatic Start and Stop
When media is fed into the processor, the input sensors automatically
activate the following functions:
1. The roller transport motor.
2. The circulation pumps for developer and fixer.
3. The magnetic valve for wash water.
4. The blower and heating elements in the dryer section.
When the trailing edge of the media exits the dryer and passes the
last internal sensor, these functions automatically stop.
9–6
•
Avantra User Guide
To Next Page
Loading...
