AGFA SelectSet Avantra - Introduction

Introduction
This chapter describes the functions and features of the six control
panel screens. It provides the information you need for the daily oper-
ation of the SelectSet Avantra imagesetter.
The following topics are described:
• The Run Screen
• The Pause Screen
• Status Icons that appear in the Run and Pause Screens
• The Cassette Setup Screen
• The Feed Amounts Screen
• The Utilities Screen
• The Configuration Screen
Many of the functions you perform at the SelectSet Avantra control
panel can also be performed by downloading RIP user tools to your RIP.
Certain features of the SelectSet Avantra can be activated only by RIP
user tools.
For more information, see Appendix C: RIP User Tools in this user guide
and refer to your RIP documentation.
Using the Control Panel • 3–1