Processor Status and Error Messages
This section describes status and error messages that appear on the
Avantra 20/25 OLP processor control panel.
Job in Bridge
Meaning: Media is currently in the bridge. There may also be
media in the drum being imaged and media in the
processor.
Action: No action required. Do not use the processor top
door for offline processing while this message
appears.
Job in Proces
Meaning: Media is currently in the processor and no new job
has started imaging since last piece of media en-
tered the processor.
Action: No action required. Status message only.
Input Jam
Meaning: Media activated the input sensors of the processor,
but did not reach the input out sensors in the
given amount of time. When the processor displays
this message, the imagesetter displays message
57, Processor Error.
Action: Check the processor input rollers for a possible
media jam.
Avantra 20/25 OLP: Processor Operation
•
9–29
To Next Page
Loading...
