Display Job History
When you press Display Job History, the imagesetter displays the
names of the last five jobs that have been imaged.
• The first line shows the number of jobs currently in the display.
• Subsequent lines show the job name, then this information; page,
copy, separation. This is shown in the same format used in the Run
Screen.
• This function only displays jobs that are completed. Jobs that you
abort at the imagesetter control panel do not appear.
• A limited number of spaces are available to display the name. Job
names that are too long are cut from the left.
• New job names are added to the bottom of this list.
• The oldest entry is discarded when the list exceeds five jobs.
• This list is cleared when you shut down or reset the imagesetter.
To Next Page
Loading...
