AGFA SelectSet Avantra - Page 206

Buttons, 1–4
Abort, 2–6
Accept, 2–6, 2–7
and setting parameters, 2–9,
2–10
Cancel, 2–6, 2–7
Cut, 3–25
Dial Out, 6–17
Display Job History, 3–7
Feed Amount, 3–23
Feed and Cut Amount, 3–23
Feed and Cut, 3–5
Feed, 3–25
Interpage Spacing, 3–23
Load, 3–5
Minus, 2–6, 2–7
Minus, special features, 2–7
Output Mode, 8–4
Pause, 2–6
Plus, 2–6, 2–7
Plus, special features, 2–7
Processor Timeout, 3–27
Retract Punches and Nips,
3–25
Reverse Feed, 3–25
Run, 2–6
Supply Alarm Amount, 3–23
Switch Supplies, 3–25
Take-up Alarm Amount, 3–23
that change appearance, 2–11
that you press twice, 2–11
Unload, 3–6
Viewing Angle, 3–27
Volume, 3–27
C
Cancel button, 2–6, 2–7
Carriage Hit End of Travel, 6–4
Carriage Jam, 6–3
Carriage Position Error, 6–6
Carriage Speed Error, 6–9
Carriage Switch Broken, 6–5
Cassette number, 3–10
Cassette parameters table, 3–21
Cassette parameters, 3–19
and loading media, 4–7
Cassette Setup Screen, 3–16
Centered alignment mode, 3–9
Changing temperature, 9–13
Changing developer time, 9–12
Changing time setting, 9–7
Changing replenishment rates,
9–14
Class I laser device, 1–9
Configuration Screen, 2–9, 3–26
and on-line processor, 8–4
Control panel screen and View-
ing Angle, 3–27
Control panel screens, 2–4
Control panel speaker, 3–27
I–2 • SelectSet Avantra User Guide