Operational Commands
7210 SAS D, E, K OS Quality of Service Guide Page 159
Network Ingress QoS Policy Commands
fc
Syntax [no] fc fc-name [create]
Context config>qos>network>ingress
Description
This command creates a class instance of the forwarding class. Once the fc-name is created,
classification actions can be applied and it can be used in match classification criteria.
The no form of the command removes all the explicit meter mappings for fc-name forwarding
types. The meter mappings revert to the default meters for fc-name.
Default
Undefined forwarding classes default to the configured parameters in the default policy policy-id
1.
Parameters fc-name — The case-sensitive, system-defined forwarding class name for which policy entries will be
created.
Values be, l2, af, l1, h2, ef, h1, nc
create — The keyword used to create the forwarding class. The create keyword requirement can be
enabled/disabled in the environment>create context.
ingress
Syntax ingress
Context config>qos>network policy-id
Description
This command is used to enter the CLI node that creates or edits policy entries that specify the
Dot1p to forwarding class mapping for all packets.
When pre-marked packets ingress on a network port, the QoS treatment through the 7210 SAS-
based on the mapping defined under the current node.
To Next Page
Loading...
Need help?
General
