Alcatel-Lucent 7210 SAS Series User Manual

Operational Commands
7210 SAS D, E, K OS Quality of Service Guide Page 165
cbs
Syntax cbs size-in-kbits
no cbs
Context config>qos>network>ingress>meter
Description
Platforms Supported: 7210 SAS-E.
This command provides a mechanism to override the default reserved tokens for the meter. The
committed burst size parameter specifies the maximum burst size that can be transmitted by the
source while still complying with the CIR. If the transmitted burst is lower than the CBS value
then the packets are marked as in-profile by the meter to indicate that the traffic is complying
meter configured parameters.
The no form of this command returns the CBS size to the default value.
Default 32Kbits
Parameters size-in-kbits — Specifies the size parameter is an integer expression of the number of kilobits reserved for
the meter. For example, if a value of 10KBits is desired, then enter the value 10.
Values 32— 16384, default
cbs
Syntax cbs size [kbits|bytes|kbytes]
no cbs
Context config>qos>network>ingress>meter
Description Platforms Supported: 7210 SAS-D.
This command provides a mechanism to override the default CBS for the meter. The committed burst size
parameter specifies the maximum burst size that can be transmitted by the source while still complying with
the CIR. If the transmitted burst is lower than the CBS value then the packets are marked as in-profile by the
meter to indicate that the traffic is complying meter configured parameters.
The no form of this command returns the CBS size to the default value.
Default 32kbits
Parameters size — Specifies the size parameter is an integer expression of the number of kilobits or kilobytes or bytes
reserved for the meter. For example, if a value of 100 KBits is desired, then enter the value 100. The
bucket size is rounded off to the next highest 4096 bytes boundary. The value can be specified in either
kilobits or kilobytes or bytes. The value can be specified in either kilobits or kilobytes or bytes.
Values kbits : [4..16384 | default]
bytes : [512..2097152]

Alcatel-Lucent 7210 SAS Series Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS Series
Category	Switch
Language	English