Alcatel-Lucent 7210 SAS Series User Manual

Network Queue QoS Policy Commands
Page 216 7210 SAS D, E, K OS Quality of Service Guide
Show Commands
network-queue
Syntax network-queue [network-queue-policy-name] [detail]
Description
This command displays network queue policy information.
Context show>qos
Parameters network-queue-policy-name — The name of the network queue policy.
Values Valid names consist of any string up to 32 characters long composed of printable, 7-bit
ASCII characters. If the string contains special characters (#, $, spaces, etc.), the entire
string must be enclosed within double quotes.
detail — Includes each queue’s rates and adaptation-rule and & cbs details. It also shows FC to queue
mapping details.
*A:card-1# show qos network-queue nq1
===============================================================================
QoS Network Queue Policy
-------------------------------------------------------------------------------
Network Queue Policy (nq1)
Table 39: Network Queue Labels and Descriptions
Label Description
Policy
The policy name that uniquely identifies the policy.
Accounting
Displays whether the accounting mode is packet-based or frame-
based.
Description
A text string that helps identify the policy’s context in the config-
uration file.
Port-Id
Displays the physical port identifier where the network queue
policy is applied.
Queue
Displays the queue ID.
CIR
Displays the committed information rate.
PIR
Displays the peak information rate.
CBS
Displays the committed burst size.
FC
Displays FC to queue mapping.

Alcatel-Lucent 7210 SAS Series Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS Series
Category	Switch
Language	English