Alcatel-Lucent 7210 SAS Series User Manual

Overview of service ingress policy on 7210 SAS-K
Page 232 7210 SAS D, E, K OS Quality of Service Guide
• If a FC is created without explicit meters, the default meter “1” is used for unicast traffic
and multicast traffic.
• If a FC is created with an explicit unicast meter, that meter is used for unicast traffic and
for multicast traffic.
• If a FC is created with an explicit unicast meter and explicit multicast meter, use the
unicast meter for unicast traffic and multicast meter for multicast traffic.
The following are rules for meter selection for IES and VPRN services when PIM/multicast is
enabled in the service and when meter “11” is defined in the policy:
• If a FC is created without explicit meters, use the default meter “1” for unicast traffic and
default meter “11” for multicast traffic.
• If a FC is created with an explicit unicast meter, use that meter for unicast traffic and use
default meter “11” for multicast traffic.
• If a FC is created with an explicit unicast meter and explicit multicast meter, use the
unicast meter for unicast traffic and multicast meter for multicast traffic.

Alcatel-Lucent 7210 SAS Series Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS Series
Category	Switch
Language	English