Alcatel-Lucent 7210 SAS Series - Page 252

Basic Configurations
Page 246 7210 SAS D, E, K OS Quality of Service Guide
Service Ingress QoS Meter for 7210 SAS-D, E
To create service ingress meter parameters, define the following:
• A new meter ID value — The system will not dynamically assign a value.
• Meter parameters — Ingress meters support the definition of either srTCM (Single Rate
Tri-Color Meter) or trTCM (Two Rate Tri-Color Meter), CIR/PIR, CBS/MBS parameters.
The following displays an ingress meter configuration:
A:ALA-7>config>qos# info
#------------------------------------------
echo "QoS Policy Configuration"
#------------------------------------------
...
sap-ingress 100 create
description "Used on VPN sap"
meter 1 create
exit
meter 11 multipoint create
exit
meter 2 create
rate cir 11000
exit
meter 3 create
cbs 32
rate 11000
exit
meter 4 create
rate 1
exit
meter 5 create
cbs 64
mbs 128
rate cir 1500 pir 1500
exit
meter 6 create
mode srtcm
rate cir 2500 pir 2500
exit
meter 7 create
cbs 256
mbs 512
rate cir 100 pir 36
exit
meter 8 create
cbs 256
mbs 512
rate cir 11000
exit
meter 9 create
rate cir 11000
exit
meter 10 create
rate cir 1