Operational Commands
7210 SAS D, E, K OS Quality of Service Guide Page 301
renum
Syntax renum old-entry-id new-entry-id
Context config>qos>sap-ingress>ip-criteria
config>qos>sap-ingress>ipv6-criteria
config>qos>sap-ingress>mac-criteria
Description This command renumbers existing QoS policy criteria entries to properly sequence policy entries.
This can be required in some cases since the 7210 SAS exits when the first match is found and executes the
actions in accordance with the accompanying action command. This requires that entries be sequenced
correctly from most to least explicit.
Parameters old-entry-id — Enter the entry number of an existing entry.
Default none
Values 1 — 64
new-entry-id — Enter the new entry-number to be assigned to the old entry.
Default none
Values 1 —64
To Next Page
Loading...
Need help?
General
