Alcatel-Lucent 7210 SAS Series - Page 334

Service Meter QoS Policy Commands
Page 344 7210 SAS D, E, K OS Quality of Service Guide
Accounting : packet-based
Classifiers Allowed : 2 Meters Allowed : 1
Classifiers Reqrd (VPLS) : 2 Meters Reqrd (VPLS) : 1
Classifiers Reqrd (L3 Mc) : 2 Meters Reqrd (L3 Mc) : 1
Classifiers Reqrd (EPIPE) : 2 Meters Reqrd (EPIPE) : 1
Description : (Not Specified)
-------------------------------------------------------------------------------
Meter Mode CIR Admin CIR Rule PIR Admin PIR Rule CBS Admin MBS Admin
Color Mode CIR Oper PIR Oper CBS Oper MBS Oper
-------------------------------------------------------------------------------
1 TrTcm1 0 closest max closest def def
color-blind 0 20000000 32 512
-------------------------------------------------------------------------------
FC UCastM MCastM BCastM UnknownM
-------------------------------------------------------------------------------
No FC-Map Entries Found.
-------------------------------------------------------------------------------
Match Criteria
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
IP Match Criteria
-------------------------------------------------------------------------------
Entry : 1
Description : (Not Specified)
Source IP : Undefined Source Port : None
Dest. IP : Undefined Dest. Port : None
Protocol : none DSCP : cp63
Fragment : Off Ip Precedence : None
FC : be
-------------------------------------------------------------------------------
IPv6 Match Criteria
-------------------------------------------------------------------------------
No Match Criteria Entries found.
SAP Associations
-------------------------------------------------------------------------------
Service-Id : 1 (Epipe) Customer-Id : 1
- SAP : 1/1/24
dscp-classification
Syntax dscp-classification [policy-id] [detail]
Context show>qos
Description This command displays dscp-classification QoS policy information.
Parameters policy-id — Displays information about the specific policy ID.