Alcatel-Lucent 7210 SAS Series - Page 345

Access Egress QoS Policies
7210 SAS D, E, K OS Quality of Service Guide Page 347
*A:card-1>config>qos>access-egress# info detail
----------------------------------------------
description "Default Access egress QoS policy."
no remarking
scope template
queue 1
adaptation-rule cir closest pir closest
rate cir 0 pir max
exit
queue 2
adaptation-rule
adaptation-rule cir closest pir closest
rate
cir 0 pir max
cbs
default = 3200 bytes
remarking
yes (for 7210 SAS-E), no (for 7210 SAS-D)
fc af:
dot1p-in-profile 2
dot1p-out-profile 2
fc be:
dot1p-in-profile 0
dot1p-out-profile 0
fc ef:
dot1p-in-profile 5
dot1p-out-profile 5
fc h1:
dot1p-in-profile 6
dot1p-out-profile 6
fc h2:
dot1p-in-profile 4
dot1p-out-profile 4
fc l1:
dot1p-in-profile 3
dot1p-out-profile 3
fc l2:
dot1p-in-profile 1
dot1p-out-profile 1
fc nc:
dot1p-in-profile 7
dot1p-out-profile 7
Table 41: Access Egress Default Policy Details (Continued)
Field Default