Show Commands
7210 SAS D, E, K OS Quality of Service Guide Page 463
Show Commands
port-scheduler-policy
Syntax port-scheduler-policy [port-scheduler-policy-name] [association]
Context show>qos
Description
This command displays port-scheduler policy information
Parameters port-scheduler-policy-name — Displays information for the specified existing port scheduler policy.
association — Displays associations related to the specified port scheduler policy.
Output Show QoS Port Scheduler Output —
The following table describes the QoS port scheduler
policy fields.
Sample Output
*A:card-1>config# show qos port-scheduler-policy
===============================================================================
Port Scheduler Policies
===============================================================================
Policy-Id Description Mode
default Default Port Scheduler Policy. STRICT
psp WRR
test psp WRR
===============================================================================
*A:card-1>config#
*A:card-1>config# show qos port-scheduler-policy psp association
===============================================================================
QoS Port Scheduler Policy
Label Description
Policy Name
Displays the port scheduler policy name.
Associations
Displays associations related to the specified port scheduler
policy.
Mode
Displays the port scheduler policy mode (STRICT, RR, WRR,
WDRR).
Accounting
Displays whether the accounting mode is frame-based or packet-
based
Last Changed
Displays the last time the configuration changed.
Queue #
Displays the weight of the queue if configured.
To Next Page
Loading...
Need help?
General
