Alcatel-Lucent 7210 SAS Series User Manual

Page 464 7210 SAS D, E, K OS Quality of Service Guide
Show Commands
remark-policy
Syntax remark-policy [<policy-id>] [association|detail]
Context show>qos
Description
This command displays remark policy information.
Parameters policy-id — The ID of the remark policy.
detail — Displays detailed information about the remark policy.
Output Remark Policy Output Fields — The following table describes remark policy output fields.
Sample Output for 7210 SAS-K
*A:SAH01-051> show qos remark-policy 300 detail
===============================================================================
QoS Remarking Policies
===============================================================================
-------------------------------------------------------------------------------
Remark Policy-id : 300 Type : dscp
Description : (Not Specified)
-------------------------------------------------------------------------------
FC Name DSCP DSCP
InProf OutProf
-------------------------------------------------------------------------------
be be be
l2 cs1 cs1
af af11 af12
l1 af21 af22
h2 af41 af41
ef ef ef
h1 nc1 nc1
nc nc2 nc2
-------------------------------------------------------------------------------
Label Description
Remark Policy ID
The ID that uniquely identifies the policy.
Type
Displays the type of the remark policy.
dot1P
dot1p value for in-profile packets.
fc name
Forwarding Class name.

Alcatel-Lucent 7210 SAS Series Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS Series
Category	Switch
Language	English