Global Service Command Reference
Page 108 7705 SAR OS Services Guide
Generic Commands
description
Syntax description description-string
no description
Context config>service>customer
config>service>sdp
Description This command creates a text description stored in the configuration file for a configuration context.
The no form of this command removes the string from the context.
Default No description is associated with the configuration context.
Parameters description-string — the description character string. Allowed values are any string up to 80
characters long composed of printable, 7-bit ASCII characters. If the string contains special
characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
shutdown
Syntax [no] shutdown
Context config>service>sdp
config>service>sdp>keep-alive
Description The shutdown command administratively disables an entity. The operational state of the entity is
disabled as well as the operational state of any entities contained within. When disabled, an entity
does not change, reset, or remove any configuration settings or statistics. Many objects must be shut
down before they may be deleted. Many entities must be explicitly enabled using the no shutdown
command.
The no form of this command places the entity into an administratively enabled state.
Services are created in the administratively down state (shutdown). When a no shutdown command
is entered, the service becomes administratively up and then tries to enter the operationally up state.
Default administrative states for services and service entities are described in the following Special
Cases.
Special Cases
Service Admin State — bindings to an SDP within the service will be put into the out-of-service
state when the service is shut down. While the service is shut down, all customer packets are dropped
and counted as discards for billing and debugging purposes.
To Next Page
Loading...
