Internet Enhanced Service
7705 SAR OS Services Guide Page 389
Show Commands
customer
Syntax customer [customer-id]
Context show>service
Description This command displays service customer information.
Parameters customer-id — specifies the customer ID number to be displayed
Values 1 to 2147483647
Output
The following output is an example of service customer information, and
Table 46 describes the
fields.
Sample Output
A:ALU-2# show service customer 1
===============================================================================
Customer 1
===============================================================================
Customer-ID : 1
Contact : Tech Support
Description : Default customer
Phone : (613) 555-1122
===============================================================================
Table 46: Show Service Customer Output Fields
Label Description
Customer-ID ID that uniquely identifies the customer
Contact Name or title of the primary contact person
Description Generic information about the customer
Phone Phone number by which to reach the contact person
To Next Page
Loading...
