Alcatel-Lucent 7705 - Show Service Commands

VPRN Services
7705 SAR OS Services Guide Page 481
Show Service Commands
id
Syntax id service-id {all | arp | base | dhcp | interface | sap | sdp}
Context show>service
Description This command displays information for a particular service ID.
Parameters service-id — the unique service identification number that identifies the service in the service domain
all — detailed information about the service
arp — ARP entries for the service
base — basic service information
dhcp — DHCP entries
interface — service interfaces
sap — SAPs associated to the service
sdp — SDPs associated with the service
all
Syntax all
Context show>service>id
Description This command displays detailed information for all aspects of the service.
Output
The following output is an example of service ID all information, and
Table 58 describes the fields.
Sample Output
*A:ALU-2#>show>service>id# all
===============================================================================
Service Detailed Information
===============================================================================
Service Id : 6
Service Type : VPRN
Customer Id : 1
Last Status Change: 02/03/2010 21:59:01
Last Mgmt Change : 03/01/2010 18:55:58
Admin State : Down Oper State : Down